WildGuarder® Scouting Trail Camera WG-1010G&WG-1011G
WildGuarder® WG-1010G&WG-1011G is the first generation of 3G wireless cellular trail camera. With its highly sensitive Passive Infra-Red (PIR) sensor the camera detects the sudden change of ambient temperature caused by moving game in a region of interest (ROI), triggered to take pictures/videos.
WildGuarder® WG-1010G is for Europen Market
WildGuarder® WG-1011G is designed for US Market
Camera Features and Specification:
-Built in 2G/3G data modem.
-Supporting 3G UMTS/HSPDA, 2G GSM/GPRS cellular data network (freq bands 850~1900MHz)
-High precision multi-layer glass lens with coating.
-Focusing: 1.5M (5 ft) to infinity, view angle: 50 degrees
-Built auto IR cut filter.
-Invisible infrared LED effective Range up to 20M (60 ft).
-PIR detection angle: 48 degrees. Detection distance: 12 meter (45 Feet).
-Image resolution Options: 5.0M, 2.0M, 1.0M.
-Video resolution: HD 720P pixels with Audio recording.
-Image interpolated from 2M Low Light Sensor
-Capturing Options: 1 - 9 image burst mode or 600 seconds video recording with audio.
-Time Lapse Mode: Sets the frequency taking of pictures during a time frame.
-Hybrid mode: PIR capture and Time Lapse mode auto changing.
-Time Out for PIR operation: 5 secs – 60 minutes
-Event Timer for TLM operation: 5 secs – 600 secs and OFF.
-Auto Real time clock for date and time stamping.
-Built in temperature sensor for reading stamps to image/video.
-Image format: Standard JPEG/Motion JPEG.
-Auto white balance and auto expose.
-Built in 2.7 in Color TFT display with back light.
-External memory support: SD memory card up to 32GB.
-Interface type: USB 2.0
-Power: AA size alkaline Batteries x 12
-External power: DC 12 Volts battery pack or power adaptor (Sold separately)
-Operating Environment: 14 to 104 deg F (-10 to 40 deg C). 20-85% relative humidity, non- condensing.
Special care instructions !!
-The scouting trail camera is designed to be weather resistant. Never attempt to immerse the unit in water or any other liquid. This will damage the unit and void the warranty.
-Use a soft lens cloth for cleaning lens. Avoid touching lens with fingers. And remove dirt or stains with a soft cloth dampened with water or neutral detergent. Keep your scouting trail camera in a dry and cool dust-free environment or container when it is NOT used.
-Take the batteries out, when camera is NOT to be used over an extended period of time.
-Avoid dropping your camera on to a hard surface.
-Do not disassemble your camera.
-Do not mix new and old batteries.
-Do not open the camera for unauthorized service. This could cause serious damage to the unit and will void the warranty.